Our comfortable bicycle seats,
gel bicycle seat pads,
and exercise bike seats help relieve pain and numbness
allowing you to get more exercise.
22204202015222
Exercise Bike Seat
Adaptor Kit Installation
Instructions
Guaranteed Or Your Money Back!
Bicycle Seat Post Clamp - Installation
Instructions (Saddle Clamp or Post Clamp)
Set the seat post clamp
with the inside indented post stopper "nub" down.
(or next to the seat)
Remove the nut.
Remove the outer
"D" shaped retaining plate.
Remove and separate the
right side inner round piece from the center "U" clamp.
Pull out the center Rod.
Remove and separate the
left hand inner round piece from the center "U" clamp.
Insert the center
"U" clamp in between the rails of your seat, and insert
the left hand inner round piece between the rail and the U
clamp.
The rail should be in the groove of
the left hand inner round piece
Rail in the groove.
Rotate the inner round
piece to press the toothed sides flat together.
Insert the center rod,
but not all the way through.
These
are the steps that are important.
Insert the right hand inner round
piece onto the seat rail just below the "U".
Rotate the inner round
piece to press the toothed sides flat together.
It is a tight fit, press hard.
If they are not pressing
flat, try lifting up on the
rod and pressing down on the center.
Also try pressing the
inner round piece at the same time with your other hand.
It will snap in place, be firm.
Align the centers of
each piece.
Push the rod through the centers.
Install the outer
"D" shaped retaining plate.
The outer "D"
shaped plate should fit inside the Inner round piece.
Install the nut.
Place your seat over the
post of the exercise bike seat adaptor or your bicycle's 7/8"
seat post.
Use our wide comfortable bicycle seats and
exercise bike seats on your outdoor bicycle and indoor exercise bike.
Fits mountain bikes, road bikes, touring bikes, comfort bikes, stationary bikes and
mopeds too.
( Our Amazon Store: Derriairbikeseats ) -
Get more exercise and get healthy!
